What did you do rocket wise today?

[tfischer]

Progress on several fronts today. Injecting internal fillets in the 3" MAC Zodiac using a syringe and plastic tube - less messy than the others have been. Finished repainting a red stripe on the LOC Hi-Tech nose cone, it had peeled when originally unmasking the full-airframe-length stripe, and repainting an aligned same-width stripe has been harder than I expected. And got another coat of white on the Estes Starlight, hopefully good enough to call done!

 

[frogglicker]

I spent the weekend designing and printing a 3D-printed Nike Smoke and finally finished an hour ago. It's built on a 3" LOC tube with 38mm and 54mm options. The nosecone is beastly, split into three pieces. I put the STL files and a sim file up on Printables. There's nothing much in the way of a description yet, but the design/build thread is here. I will expand on it once I start the actual build.


Nike Smoke 3-in Concept


Nike Smoke Builder's Kit

 

[Cape Byron]

Captain Confident starts working on instructions for a completely untested design.

Well, the swing test was really, really good...

 

[n3tjm]

Spent some money

 

[CPO Fast Forward]

Canada Day launch!
Technically this was yesterday as Canada Day is July 1, but we did it within the last 24 hours so I say fair on a technicality

 

[PatD]

Decided I was tired of casings all over the place so I organized.

 

[Leo]

I uploaded a challenging project if anyone wants to tackle it:

https://www.thingiverse.com/thing:6672074

It was a pain having to go through all the old scale data diagrams.
95% complete but still work in progress for now.
Feedback is welcomed.

 

[Art Upton]

Decided I was tired of casings all over the place so I organized. View attachment 653990View attachment 653991View attachment 653992

I have one of those in Kaki, but never made foam cutouts for what it held in airline baggage

I was fretting on the way back home, it did not come out the Baggage chute carousal like it did in Dallas Fort Worth.
I later asked the airline where my baggage case was and they said in the baggage claim office.
It had caught a flight before mine to Detroit, and got there before me and was just circling around the baggage pickup carousal.
So they picked it up and put it in the office.

I don't have to say what was in it do I
It did have me concerned for a little while.

 

[n3tjm]

Mail Call

 

[Cape Byron]

Took some reference pics to help with illustrating the instructions.



Still annoyed about the paint defects.

 

[berlinetta]

I now havevthe motor mount completed for the half scale Esoteric. I drilled 1/2" holes into the top centering ring so I can use all five motor tubes. The holes will allow ejection gases to pass through the top centering ring. Because of this, I applied a coat of epoxy on the bottom of the centering rings to protect it from the ejection charges. Tonight the motor mount gets installed.

 

[Wayco]

Built the first of six research 76/6000 motors for Airfest. I'm keeping busy down here in sunny Arizona, need to make a bunch of motors for two more launches in Colorado this month, then Airfest next month. All my research stuff is down here, next week it's back up to Red River, NM for the rest of the summer.

 

[tfischer]

Started assembling the outside rings onto the Starlight airframe. They were a pain to mask and paint but I liked the red and white scheme I had seen on someone else's model so am trying this.

 

[Cape Byron]

Mail call!