loopy
Well-Known Member
Well, I have officially started my level three build. Woohoo! I got a Skinwalker kit (number 46) from Wildman on Black Friday, and finally got around b to starting the build after getting my plan signed off by my TAP members.
Started off with assembling the lower coupler (e.g. epoxying the stiffy into the coupler tube), then attaching the y harness to the upper centering ring with the u bolts. The upper and mid centering rings have been attached to the motor tube and filleted, and the fin slots were extended to allow for assembling the fin can outside of the booster tube.
The fins have been tacked on, and I’ve started applying fillets.
I’m having fun with this one so far!
Started off with assembling the lower coupler (e.g. epoxying the stiffy into the coupler tube), then attaching the y harness to the upper centering ring with the u bolts. The upper and mid centering rings have been attached to the motor tube and filleted, and the fin slots were extended to allow for assembling the fin can outside of the booster tube.
The fins have been tacked on, and I’ve started applying fillets.
I’m having fun with this one so far!