El Cheapo
Well-Known Member
- Joined
- Jan 20, 2009
- Messages
- 1,658
- Reaction score
- 7
I built this MM for my Son Jon almost two years ago. Construction was straight forward save for a few additions. Fins were laminated with 110/lb card stock. The stock couplers were scrapped and were all replaced with 6" long each coupler material from BMS that are only friction fit, no glue. Lastly, it is center break with mesh baffle. The only two motors it's flown on are F24's and F39's.
Last edited by a moderator: