And of course Dollar Tree has Adams RediBoard (foam board) at least most of the time.
I think we have the foam board availability covered. Back on the thread subject, please!And of course Dollar Tree has Adams RediBoard (foam board) at least most of the time.
It's a fairly easy conversion, but there are a couple things to watch out for. See post #7 and 8 about my warped fins.Fair enough! I have two of the Amazon deal BDRMs on hand, and am considering the Citation Patriot as one option for using one of them.
I’m currently painting my second Der Big Red Max to Citation Patriot conversion with a 38mm mount instead of a 29. I’m looking forward to flying 1 and 2 grain 38mm motors in it.
Yikes! Put a tracker in it. On single grain G motors, Rocksim says this one goes up to around 1700 feet.
A G64 sends is up to almost 1900 feet. That's getting to the outside edge of visual range with a rocket this small.
38mm two grain motors? Say "goodbye" to your rocket!
Yikes! Put a tracker in it. On single grain G motors, Rocksim says this one goes up to around 1700 feet.
A G64 sends is up to almost 1900 feet. That's getting to the outside edge of visual range with a rocket this small.
38mm two grain motors? Say "goodbye" to your rocket!
I kept clear visual track of a drone that was 2000 feet away and 180 high against a clouded sky. It was light grey and smaller than a Big Daddy.
Um... good for you?
It was meant to be a reference point. Here, we're talking about rockets easily 3x the size and brightly colored being lost forever when they go a similar distance away from the viewer.
Also, I never said that a small rocket going to 2000 ft will be lost forever.It was meant to be a reference point. Here, we're talking about rockets easily 3x the size and brightly colored being lost forever when they go a similar distance away from the viewer.
I've put my DBCP through many trials and tribulations. Broke off one plywood fin, cracked another, zippered halfway down, and lawndarted. Nothing a little polish can't fix.
Maybe calm down a bit and stop being such a Karen. Enjoying your built but you seem a bit high strung. Maybe go pet a bunny or something to take the edge off?Um... good for you?
Whatever...Maybe calm down a bit and stop being such a Karen. Enjoying your built but you seem a bit high strung. Maybe go pet a bunny or something to take the edge off?
OMG! I am completely baffled why I called my piston a baffle.That's an interesting baffle.
Enter your email address to join: