user 45779
Well-Known Member
- Joined
- Nov 21, 2023
- Messages
- 57
- Reaction score
- 96
This build thread will be my entry for the TRF Challenge #1: Estes Menace.
I will post all the files (stl, svg, ork, etc.) once the build is complete.
If all goes well, our next launch event is on 3/9, so might get a flight on record before the 3/15 deadline.
View attachment 632683
Super Menace Parts List
-----------------------------------
(1) NC-80B Nose Cone
(1) 23.5" BT-80 Body Tube
(2) 3/16" X 1" Launch Lugs
(1) 6" X 12" x 1/8" Balsa Sheet
(1) Intake Scoop (3D Printed)
(3) CR5080 Centering Rings
(1) 8" BTH-50 Engine Mount Tube
(1) CR2050 Engine Block Ring
(1) 24mm Threaded Motor Retainer (3D Printed)
(1) 18" or 24" Parachute
(1) 24" 250# Kevlar Cord
(1) 1/4" X 48" Elastic Shock Cord
(1) #4 Ball Bearing Fishing Swivel
I will post all the files (stl, svg, ork, etc.) once the build is complete.
If all goes well, our next launch event is on 3/9, so might get a flight on record before the 3/15 deadline.
View attachment 632683
Super Menace Parts List
-----------------------------------
(1) NC-80B Nose Cone
(1) 23.5" BT-80 Body Tube
(2) 3/16" X 1" Launch Lugs
(1) 6" X 12" x 1/8" Balsa Sheet
(1) Intake Scoop (3D Printed)
(3) CR5080 Centering Rings
(1) 8" BTH-50 Engine Mount Tube
(1) CR2050 Engine Block Ring
(1) 24mm Threaded Motor Retainer (3D Printed)
(1) 18" or 24" Parachute
(1) 24" 250# Kevlar Cord
(1) 1/4" X 48" Elastic Shock Cord
(1) #4 Ball Bearing Fishing Swivel