Peak of Flight 599 has the Eiffel Tower plan, so of course I had to do it. Directions are fine as far as they go, but a little more detail in attaching the horizontal members would have been appreciated. Note: sometimes hot glue is a pain.
As to the nose, to make it easier, I drilled a small pilot hole and then epoxied a 3-3/4" long screw eye and epoxied the coupling in at the same time. Hopefully going to fly it this Saturday.
As to the nose, to make it easier, I drilled a small pilot hole and then epoxied a 3-3/4" long screw eye and epoxied the coupling in at the same time. Hopefully going to fly it this Saturday.
Attachments
-
PXL_20230603_220448492.jpg1.8 MB · Views: 3
-
IMG_20230605_215623_01.jpg1.4 MB · Views: 2
-
PXL_20230602_125119121.jpg1.1 MB · Views: 1
-
PXL_20230606_193056595.jpg1.1 MB · Views: 0
-
PXL_20230606_193123412.jpg847.1 KB · Views: 0
-
PXL_20230606_193913219.jpg824.4 KB · Views: 0
-
PXL_20230606_193935868.jpg1 MB · Views: 0