I was inspired by bwp0001 post of his model using the SRBs as fin tubes to try my hand at making this one. Using a BT60 as the main frame and AMX paper modelling for the wraps the scale works out to 1/92. I’ll be using the medium length PLF on this model and will use A BT70 tube with 4 extra wraps of heavy card stock on the exterior to bring the diameter to the correct scale diameter. Pictured below are the 5 SRBs with wraps and the nozzle inserts constructed of .04” plastic with 28# paper cones CA harden. The plastic and cones were glued with RC Modellers Canopy glue and will be painted white before being glued into the SRBs.