Samarth Barshi
Member
- Joined
- Aug 31, 2023
- Messages
- 23
- Reaction score
- 2
I am trying to make a launch pad from some steel sections and 2020 aluminum rail. I have got a 3m rail and can support the rail upto 2m by steel section. Will the other left out 1m be safe during launch or should I cut it? I don't want the bending of rail to alter the course of rocket or worse. Any input can help me. Thankyou
Edit 2020 means 20mmx20mm which would be close to the 1010 inch rail used in US.
Edit 2020 means 20mmx20mm which would be close to the 1010 inch rail used in US.
Last edited: