- Joined
- Jan 27, 2009
- Messages
- 4,509
- Reaction score
- 3,023
I was experimenting with a couple of different build techniques/simplifications and some different materials on the R/C shuttle kit that I make but it turned out so nice I just decided to finish it. For something different I went with the Moonraker color scheme, there's a little bit of paint on the nose cone but everything else is self-adhesive automotive 3m vinyl trim that I cut by hand with an exacto knife including the logos. This is about 1/72nd scale and 7.9 oz ready to fly with RC equipment and 24mm E motor installed. 23" long, 18.5" wingspan![IMG_20220429_143850959~2.jpg IMG_20220429_143850959~2.jpg](https://cdn.imagearchive.com/rocketryforum/data/attachments/433/433363-2bdf0d4c4ebcd8d8be615d8a2b608338.jpg)
![IMG_20220429_143949980~2.jpg IMG_20220429_143949980~2.jpg](https://cdn.imagearchive.com/rocketryforum/data/attachments/433/433364-39d086f06b37c2c48fd84722b2e421c5.jpg)
![IMG_20220429_143850959~2.jpg IMG_20220429_143850959~2.jpg](https://cdn.imagearchive.com/rocketryforum/data/attachments/433/433363-2bdf0d4c4ebcd8d8be615d8a2b608338.jpg)
![IMG_20220429_143949980~2.jpg IMG_20220429_143949980~2.jpg](https://cdn.imagearchive.com/rocketryforum/data/attachments/433/433364-39d086f06b37c2c48fd84722b2e421c5.jpg)