I recently took the plunge and tried some rattle
can 2k catalyzed clear coat. Was blown away with the results. Would like to get some liquid two part 2K to spray.
Two related questions with opinions requested. I have a Iawata mini gun but it only has a .6mm nozzle. Everything I’ve read says it should be in the range of 1.3-1.4 mm. I have the mini gun because I use it to spray cerakote. Would like use the same gun but not averse to buying another. My air supply is modest at 6 CFM so I could run a full gun if I had to get another. The mini gun I have I can go up to a 1.0 mm nozzle.
Looking for opinions if there is a 2K clear coat that would work with my existing equipment. Failing that, what gun, finish, compressor combinations do people use with excellent results?
Not averse to buying a new hvlp gun as they are a modest cost, but want actual feedback on “I use this brand clear with this gun and nozzle size and this compressor and get these results.”
I didn’t see any posts which included this info after searching.
Any help is appreciated.
can 2k catalyzed clear coat. Was blown away with the results. Would like to get some liquid two part 2K to spray.
Two related questions with opinions requested. I have a Iawata mini gun but it only has a .6mm nozzle. Everything I’ve read says it should be in the range of 1.3-1.4 mm. I have the mini gun because I use it to spray cerakote. Would like use the same gun but not averse to buying another. My air supply is modest at 6 CFM so I could run a full gun if I had to get another. The mini gun I have I can go up to a 1.0 mm nozzle.
Looking for opinions if there is a 2K clear coat that would work with my existing equipment. Failing that, what gun, finish, compressor combinations do people use with excellent results?
Not averse to buying a new hvlp gun as they are a modest cost, but want actual feedback on “I use this brand clear with this gun and nozzle size and this compressor and get these results.”
I didn’t see any posts which included this info after searching.
Any help is appreciated.