Heres mine after I remaiden it when the rebuild from a previous crash about 4 years ago was finally finished last week.
Im not really that slow I was just out of rocketry for the last 4 years due to various reasons.
It originally was built a little stronger. I used a beefier coupler and then used the original one to beef up the lower tube on back end where it lands. I also added 12 of 1/4 Kevlar shockcord, 5 of 3/4 tubular nylon and a short piece of the original elastic shockcord and tied that all in to the upper and lower bulkheads with a 48 American Flag Sperachute and wrapped in a Kevlar blanket.
I did not install the motor clip so I could use larger motors later and instead installed PMR on the bottom centering ring.
The first flight 4yrs ago was real nice on a G64-4 with a long smoky slow flight but unfortunately the ejection did not work and it destroyed the upper tube and NC.
This last weekend I flew it at a club launch and it flew great! I did not have a G64 so I used a G76-4. Not so smoky as the first but higher. I removed the cooling mesh, which I now know is not needed with the Kevlar up front, and installed a smaller 36 chute due to the strong wind to keep it near.
Here is a YT link, mine is the last launch.
https://youtu.be/OVAu7Pz7TNk
The one thing I did notice about the launch was that I windy days like last Sat it really moves around a lot on the 1/4" rod sooo,,, yesterday I cut off the tops of the launch lugs and installed rail buttons. Problem solved. See picture below.
I also plan to make the it about 14 longer so I can install an av bay for DD when needed.
Im also trying to decide on a paint scheme and Im down to either a red/white/blue, black/yellow, or a black/white combination.
Enjoy and any comments are welcome.
Ed