AtaKerem
New Member
Hello everyone,
I'm trying to configure a RocketPy simulation and I need to configure the rocket motor. RocketPy needs the following parameters:
- dry_mass
- dry_inertia
- nozzle_radius
- grain_number
- grain_density
- grain_outer_radius
- grain_initial_inner_radius
- grain_initial_height
- grain_separation
- grains_center_of_mass_position
- center_of_dry_mass_position
- nozzle_position
- burn_time
- throat_radius
Explanation for the parameters are here: https://docs.rocketpy.org/en/latest.../SolidMotor.html#rocketpy.SolidMotor.__init__
I can get some of the parameters like the dry mass and the burn time from thrustcurve.org but I have no idea where I can find all the other parameters. Does anybody know where I can get these parameters for an AeroTech M2500T? Thanks!
I'm trying to configure a RocketPy simulation and I need to configure the rocket motor. RocketPy needs the following parameters:
- dry_mass
- dry_inertia
- nozzle_radius
- grain_number
- grain_density
- grain_outer_radius
- grain_initial_inner_radius
- grain_initial_height
- grain_separation
- grains_center_of_mass_position
- center_of_dry_mass_position
- nozzle_position
- burn_time
- throat_radius
Explanation for the parameters are here: https://docs.rocketpy.org/en/latest.../SolidMotor.html#rocketpy.SolidMotor.__init__
I can get some of the parameters like the dry mass and the burn time from thrustcurve.org but I have no idea where I can find all the other parameters. Does anybody know where I can get these parameters for an AeroTech M2500T? Thanks!