My CARL MINION build log: today I put all the finishing touches on. Special thanks to my bride, Lorrena for producing the vinyl additions to this rocket! I installed the arms and legs using a syringe to apply the internal epoxy to hold them all in. The final flight cap was primered and sprayed metallic silver to match the other two. When I receive the dummy lights I’ll glue into each and the flight plugs will be complete. Next I added the vinyl trim and connected all the laundry. This project is now officially finished! Thanks to everyone for following along on this fun build! BE-DO, BE-DO, BE-DO!
Attachments
-
IMG_2513.jpeg1.7 MB · Views: 0
-
IMG_2515.jpeg1.6 MB · Views: 0
-
IMG_2512.jpeg1.8 MB · Views: 0
-
IMG_2517.jpeg1.3 MB · Views: 0
-
IMG_2518.jpeg2.9 MB · Views: 0
-
IMG_2520.jpeg1.3 MB · Views: 0
-
IMG_2523.jpeg1.9 MB · Views: 0
-
IMG_2524.jpeg2.7 MB · Views: 0
-
IMG_2525.jpeg1.7 MB · Views: 0
-
IMG_2526.jpeg1.7 MB · Views: 0
-
IMG_2527.jpeg1.5 MB · Views: 0
-
IMG_2528.jpeg1.6 MB · Views: 0
-
IMG_2529.jpeg2.1 MB · Views: 0