- Joined
- Feb 14, 2017
- Messages
- 210
- Reaction score
- 54
Here are my 3 last minute entry's into the contest. Sorry for potato quality pictures
First is a 54mm AVBAY with mounts for a RRc3 and a RTX/GPS, inside the mount is designed to hold a 2C lipo can also be switched to 2 x 9v. I use magnetic switch with this design but room on top to add mechanical switch holder.
Files: https://www.thingiverse.com/thing:3155467
Second is a transferable GPS holder designed to hold the RTX/GPS system and 2c LIPO or 9V. It has been flown multiple times in multiple size rockets. You can easily just drop into any nosecone avbay larger then 3" you have and launch.
Files: https://www.thingiverse.com/thing:3155494
Third at final is a AVBAY for 54mm nosecones, currently setup to hold the RTX/GPS but with the threaded design can be switched out very easily. Holds the full size RTX/GPS with whip antenna and a 2c lipo or 9v. Its very stong with hardware printed inside the avbay. Im currently working on other avbays and mounts to use this design and will eventually switch all my nosecones to this design.
Files: https://www.thingiverse.com/thing:3155484
First is a 54mm AVBAY with mounts for a RRc3 and a RTX/GPS, inside the mount is designed to hold a 2C lipo can also be switched to 2 x 9v. I use magnetic switch with this design but room on top to add mechanical switch holder.
Files: https://www.thingiverse.com/thing:3155467
Second is a transferable GPS holder designed to hold the RTX/GPS system and 2c LIPO or 9V. It has been flown multiple times in multiple size rockets. You can easily just drop into any nosecone avbay larger then 3" you have and launch.
Files: https://www.thingiverse.com/thing:3155494
Third at final is a AVBAY for 54mm nosecones, currently setup to hold the RTX/GPS but with the threaded design can be switched out very easily. Holds the full size RTX/GPS with whip antenna and a 2c lipo or 9v. Its very stong with hardware printed inside the avbay. Im currently working on other avbays and mounts to use this design and will eventually switch all my nosecones to this design.
Files: https://www.thingiverse.com/thing:3155484